Kranzle has discontinued the wall-mounted pressure washer that I had in my old wash bay. They have simplified their line and currently don't have a stainless steel cover available. I think of this pressure washer as our high-end custom install solution to be used with either a hose reel or boom pole.
This new version is wall mountable or may be placed on the ground. Another thing to note is these are designed to run for 30 seconds before shutting off to protect both the pump and electronics as they draw quite a bit of current.
For washing cars, you'll want to reduce the pressure by adjusting the size of the orifice on the spray nozzle at the end of your wand/gun. I would suggest you use a 7.0 sized nozzle that would reduce the pressure down to about 1200PSI.
I am a fully authorized Kranzle dealer and can get you the other models if this isn't the right one for you.
Specifications
Kranzle KWS700TS- Rated Flow: 3.3 GPM
- Rated Pressure: 2400 PSI
- 3 Piston Wobble Plate Pump
- Self-Priming
- Auto-start/stop with 30 second time-delay
- Power Cord
- 33’ ¼” Wire Braided High-Pressure Hose
- Electrical Requirements: 220 V, 25 A, single-phase
- Inlet: ¾” Female GHT
- Outlet: M22 Male (14mm)
- Dimensions: 31” W x 14” D x 28” H
- Weight: 187 LBS
FAQ & Support
User Manual
Kranzle KWS700-1200TS Operating Manual
Kranzle KWS700-1200TS Spare Parts
Support Articles
Will a Kranzle pressure washer work with a water tank?
Can I use a Kranzle with a generator? What wattage do I need?
Why Should I Upgrade My Sprayer and Which One Should I Get? - Upgrading Your Sprayer
Pressure Washer Fittings 101: Fittings and QD Naming
Pressure Washer Fittings 102: Applications and Usage
Pressure Washer Fittings 103: Spray Nozzles
How To: Proper Layout and Setup for Kranzle Custom Install Solution.
How To: Properly Shorten Kranzle Power Cord
How To: Set up your inlet hose or garden hose with quick disconnects
How To: Kranzle Teardown and Maintenance Deep-Dive.
How To: Setting up a Wall-Mounted Kranzle Inside with an External Hose Reel Outside
Why is my gun or wand (1/4" Coupler) leaking from the outlet?
Why is my 3/8" coupler leaking from the end?
Troubleshooting: Garden hose / inlet hose is leaking at the threads.
Troubleshooting: Kranzle leaking oil from the bottom of the casing - Kranzle Pump Oil Leak.
Troubleshooting: Kranzle Inlet Leaking Water - Garden Hose Connection.
Troubleshooting: I just got my Kranzle and it's dripping / leaking oil!
Troubleshooting: Kranzle tripping with foam cannon even on a 20A circuit.
Why does my Kranzle pressure gauge show a high or low pressure-reading
ETA Information: